Deploy a Flask Application with Dokku

Dokku is a self-hosted Platform-as-a-Service (PaaS) that makes deploying applications simple using Git. Although Dokku’s implementation is similar to Heroku, it lacks certain key features such as auto-scaling. Dokku is an extremely powerful tool that automatically runs your application inside Docker and requires minimal configuration of web servers.

This guide demonstrates how to:

• Create a Flask application that returns ‘Hello World!’ on the index page
• Install Dokku on a Linode
• Deploy a Flask application with a WSGI server inside a Docker container
• Add an SSL certificate through Dokku with the Let’s Encrypt plugin

Before You Begin

On Your Local Computer

A public key is assumed to be available. Typically this is located in ~/home/username/.ssh/id_rsa.pub.

Install Git if needed:

sudo apt install git

On Your Linode

The Dokku install script creates a dokku user on the system, installs Docker, and pulls the relevant image.

1. Download the install script from Dokku then run the script:

   wget https://raw.githubusercontent.com/dokku/dokku/v0.12.5/bootstrap.sh
   sudo DOKKU_TAG=v0.12.5 bash bootstrap.sh
   

   Preparing to install v0.11.6 from https://github.com/dokku/dokku.git...
   For dokku to build containers, it is strongly suggested that you have 1024 megabytes or more of free memory
   If necessary, please consult this document to setup swap: http://dokku.viewdocs.io/dokku/advanced-installation/#vms-with-less-than-1gb-of-memory
   --> Ensuring we have the proper dependencies
   --> Initial apt-get update
   --> Installing docker
   --> NOTE: Using Linode? Docker may complain about missing AUFS support.
       You can safely ignore this warning.
           Installation will continue in 10 seconds.
   ...

2. Navigate to the public IP address of your Linode in a browser and enter the public key:

   

   Important

   Add the public key immediately after running the installation script to avoid someone else adding a public key to Dokku. For an unattended installation, refer to the advanced installation instructions .

3. To add additional SSH keys, pipe the output over SSH to the dokku user. Replace example.com with the IP address of your Linode.

   cat ~/.ssh/id_rsa.pub | ssh dokku@example.com ssh-keys:add new-key
   

Create a Flask Application

1. On your local computer, create a new project directory:

   mkdir flask-example && cd flask-example
   

2. Create a new file called hello_world.py that serves ‘Hello World!’ on the index page.

   File: hello_world.py

   1 2 3 4 5 6 7 8 9 10 11 12 13 14

   import os from flask import Flask app = Flask(__name__) @app.route('/') def hello(): return 'Hello World!' if __name__ == '__main__': # Bind to PORT if defined, otherwise default to 5000. port = int(os.environ.get('PORT', 5000)) app.run(host='127.0.0.1', port=port)

3. Add a requirements.txt file to track versions of any dependencies of the Flask application. Gunicorn is the WSGI server used to allow Flask to interface properly with NGINX.

   File: requirements.txt

   1 2	Flask==0.12.1 gunicorn==19.7.1

4. For more complex projects with many dependencies using a virtual environment, redirect output of pip freeze into requirements.txt.

   pip freeze > requirements.txt
   

Add a gitignore

Optionally, add a .gitignore file to have Git omit caching and virtual environment files from version control.

File: .gitignore

1 2 3 4

__pycache__/ *.pyc venv/

Procfile

The Procfile tells the Gunicorn server what command to use when launching the app:

File: Procfile

1	web: gunicorn hello_world:app --workers=4

Git Remote

1. Initialize a Git repository:

   git init
   git add .
   git commit -m "Deploy Flask with Dokku"
   

2. Add a remote named dokku with the username dokku and substitute example.com with the public IP address of your Linode:

   git remote add dokku dokku@example.com:flask-example
   

3. Verify the remote is added:

   git remote -v
   

   This will list the remotes.

   dokku   dokku@example-ip:flask-example (fetch)
   dokku   dokku@example-ip:flask-example (push)

   In summary, the project layout looks like:

   flask-example
   ├── .gitignore
   ├── Procfile
   ├── hello_world.py
   └── requirements.txt
   

Create Project on a Dokku Host

1. SSH into your Linode and create the application:

   dokku apps:create flask-example
   

2. Make sure VHOST is enabled.

   dokku domains:enable flask-example
   

Deploy a Flask Application

1. On your local computer, deploy the Flask application by pushing the branch to the dokku remote. This will take care of NGINX behind the scenes and expose port 80:

   git push dokku master
   

   Other local branches can also be deployed but, all branches must be pushed to the master branch of the dokku remote:

   git push dokku branch-name:master
   

2. curl the IP address of your Linode to test that the app was deployed successfully:

   curl example.com
   

   Hello World!

SSL Certificate with Dokku and Let’s Encrypt

The remaining steps in this guide should be performed from your Linode.

1. Install the Let’s Encrypt plugin for Dokku:

   sudo dokku plugin:install https://github.com/dokku/dokku-letsencrypt.git
   

2. Set the DOKKU_LETSENCRYPT_EMAIL environment variable to the email for Let’s Encrypt:

   dokku config:set flask-example DOKKU_LETSENCRYPT_EMAIL=docs@linode.com
   

3. Add the application and domain:

   dokku domains:add flask-example example.com
   

4. Create the SSL certificate. NGINX will automatically start serving the application over HTTPS on port 443:

    dokku letsencrypt flask-example
   

5. Run this as a cron job so the certificate will renew automatically:.

   dokku letsencrypt:cron-job --add
   

   Note

   This requires Dokku version 0.5 or higher. Check by running dokku version.

Start, Stop, and Restart Applications

• List all running Dokku applications:

    dokku apps
  

• Restart an application:

    dokku ps:restart flask-example
  

• Stop an application:

    dokku ps:stop flask-example
  

• Restore all applications after a reboot:

    dokku ps:restore
  

View Application Logs

View the application logs through Dokku or the Docker container.

1. To see logs through Dokku:

   dokku logs flask-example
   

2. List all running Docker containers:

   sudo docker ps -a
   

3. Find the container ID then run:

   sudo docker logs container_id
   

Scale Applications

Dokku does not scale applications automatically, and by default will only run a single web process. To increase the number of containers running your application, you can use the ps:scale command.

1. Check how many workers your application currently has:

   dokku ps:scale flask-example
   

   -----> Scaling for flask-example
   -----> proctype           qty
   -----> --------           ---
   -----> web                1

2. Scale up to 4 web processes:

   dokku ps:scale flask-example web=4
   

3. Confirm that the new processes are running:

   -----> Scaling for flask-example
   -----> proctype           qty
   -----> --------           ---
   -----> web                4

Dokku is an open source alternative to Heroku for small applications. Deploying applications is as simple as pushing to a remote with Git. Elements such as Docker and NGINX are abstracted away to minimize time to deployment. There are additional features such as pre-deploy hooks and linking databases which are not shown in this guide.

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

• Dokku PaaS
• Flask